The selection of press brake backgauge axis is much determined by the practical use. You can select the backgauge with 1 axis (X), or 2 axis (X, R), 4 axis (X, R, Z1, Z2) or 6 axis (X1, X2, R1, R2, Z1, Z2).
Generally the press brake will be sold with one set of standard punch and dies. However, as the end user, you should select the press brake top punch and bottom die based on your practical use. You can send us your requirement for our engineers to provide you the professional suggestions.
Manual and CNC Crowning ensures a constant bend angle across the full length of the machine. This is achieved by pre-loading the machine,to offset any possible deflection under load or compensate for any tool wear,so that under load contacting surfaces are parallel to each other.
With CNC Crowing systems the press brake control is preprogrammed with machine characteristics and deflection data. With manual crowning a simple spread sheet or chart can be easily developed for each application.
Export equipment enjoys our five-year warranty period and 24-hour online after-sales service.