Max thickness of a board: 20mm
Max width of a board: 2500mm
The panel surrenders limit: 265
A board pace: 5
Fully loaded with min piameter of a board
Have the axle diameter:850mm
Make the axle diamter:340mm
Axle centre to centre spacing two times:440mm
l 3-Roller Rolling Machine's streamlined designe originated from EU, the use o the overall fram welding an annealing treatment
l Three-roller symmetric structure: driven by screw lever and turbine worm, the upper roller moves in vertical direction in the center symmetrical position betwee the lower two rollers: As the main drive roller for rotary motion, two lower rollers are engaged with the output gear of the reducer to provide torque for rolling plate . The machine is compact , easy operation and maintenance; bdesides, the hydraulic rolling machine is suitable for installation of profile dies for easy rolling of various profiles.
l Easy-to-use removable console
l Two sets of digital output for easy positioning of two lower rollrs.
l Induction hardened forged rollers or high strength work rollers with SAE 1050 quality certficate.
l Upper roller lifting motion principle: auxiliary motor and auxiliary reducer drive the worm and turbine underlateral bearing seats to move , consequently rotate the screw nut on the turbine to lift screw lever.
l BOSLASER Unloading device: when finishing rollig work, the upper roller rises up, the pull rd on the end of upper roller holding the roller, then disconnects the left bearin seat namely tiltable bearing seat ad extracts thepin shaft, turnover the tiltable bearing seat, finally, the finished ferrule will be released from the other end of the upper roller.